GODEX 2200 DRIVER

Print head density of 8 dots or 12dots per mm or dots per inch. When paper jams and cutter malfunctions, power off the printer. Rolls of ribbon up to m length can be used with any type of winding coloring layer inside or outside. Align the label roll with the Label Width Guide. For example, if the print job contains 10 labels, press the Pause key after 2 labels are printed to stop printing;

Uploader: Douhn
Date Added: 18 December 2014
File Size: 13.33 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 24941
Price: Free* [*Free Regsitration Required]

Close the Top Cover to complete the cutter installation. Align the label roll with the Label Width Guide. To print the manual completely, please, download it. Flip the Label Feed Guide back down to its original position, and clip the guide in position. At the same time they can be printed without computer. Remove the Bottom Front Cover.

Label length set by auto sensing or programming. Once the USB cable is connected from PC to the printer, PC will automatically detect the new device and 22200 the installation process. Control Panel Pressing the Pause key while printing, printer will pause the print job, when the Pause key is pressed one more time, the printer will gocex with the rest of the print job.

  ESX VMXNET DRIVER

Avoid pushing the guide gdex far in to damage the label edge. Printing mechanism of a unique design provides quick and easy labels and ribbons loading in the printer. Remove the Rewinder Option Cover Plate.

To do this, just connect the keyboard to the printer, select the desired label from the list downloaded, specify number of the copies and start printing.

GODEX / Plus Barcode Printer

Flip the Print Head Lever back to its original position. Etiquette tape, continuous paper, fabric and polymeric carriers, cardboard, etc.

Power on, Ribbon out, Media out; Control keys: Face the printer front, and unscrew the Bottom Cover Screw. Align the godes edge inward, and adjust the Label Feed Guide with the label.

Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer. Install the media into the printer refer to 2- 1 for Ribbon Installation and for Label Installation.

Gidex USB device is built on the serial port, therefore make sure the interface setting is specified to the assigned port. Page 19 Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer. Install the Rewinder unit. TPH print line adjustment 1 When printing stiff or thick paper, the print line needs to be moved forward paper feed direction in order to achieve better printing quality.

  AR M355N PCL6 DRIVER DOWNLOAD

Use 3mm hexagon screwdriver to turn the cutter blade clockwise. Screw the Cutter Cover onto the cutter kit. Remove the two screws in the front.

Godex Print Head, 203 dpi for EZ-2200Plus/EZ-2250i,

Use a flat tip screwdriver as shown in the photoand turn the screws B clockwise to move the TPH Power on the PC. This manual also for: These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

After the paper jam is cleared, power on the printer, and the cutter blade will go back to its original position. Print head density of 8 dots or 12dots per mm or dots per inch.

Label gap and black mark sensing.

Communication Interface Paralle Interface Handshake: Its features are as follows: